GroundGrabba Pro are made for general purpose amazing ground holding. To experience how well you can anchor down your Easy Up or large shade structure can only be imagined until you actually use these. Made for most ground types but not the best for sand (see the GroundGrabba Pro II or GroundGrabba Lite) or extremely hard ground like concrete or brick. For hard grounds to help depoy your GroundGrabba's, we suggest predriling a pilot hole with our 1/2" x 12" masonry drill bit. Also you will want a 3/4" Hex Socket driver to adapt to your drill which you can currently use on any of our GroundGrabba's.
GroundGrabba Pro II's are made for holding large shade / canvas areas into loose ground and soft sands. They can also be used in general ground types. Not suitable for hard to extremely hard ground but that is subjective. These will be most likely the most PRO ground anchor stakes you've ever used.
GroundGrabba Lite screws into the sand or loose soft ground using a good quality cordless drill (18V minimum with at least 45 ft lb of torque) or by hand, providing a swift, safe and secure setup along the beach or in dunes.
Made of the toughest glass reinforced nylon to give you the toughest, lightest composite material, the GroundGrabba Lite is the Recreational-Grade tent peg-stake you need to enhance your beach and sand dune camping experience.
Please Note: GroundGrabba Lite is designed and intended for use in soft and loose grounds where your average peg just won’t hold. Never use with ratchet or impact type drills or will void warranty. Designed for sideway tension like guy ropes. Not meant for a vertical loads in sand. Do note use impact devices to deploy.
HexHook Pro Lag Bolt Hook Plate Adaptor is a hook plate for securing ropes and tensioners to GroundGrabba Pro or Pro II or Lag Bolts. Designed to fit either the GroundGrabba Pro or Pro II, our HexHook Pro and adapt to ropes or tensioning devices.
- Made of mild steel
- Zinc-plated, anti-corrosion protection
- .14 pounds total weight
- 4″ total length
- 1.6″ total width
- .19″ plate thickness
- .31″ hook thickness
- .7″ hook inner diameter
- .31″ hook opening
- 1″ key hole opening
- 3/4″ hex key
- 300lb Rated
- Lifetime Warranty
Dimensions: 11 × 4 × 3.5 in